dmesg - 4770 valley
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-29-generic (buildd@tipua) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #39-Ubuntu SMP Mon Dec 15 22:27:29 UTC 2014 (Ubuntu 3.16.0-29.39-generic 3.16.7-ckt2)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cff7ffff] usable
BIOS-e820: [mem 0x00000000cff80000-0x00000000cff97fff] ACPI data
BIOS-e820: [mem 0x00000000cff98000-0x00000000cffcffff] ACPI NVS
BIOS-e820: [mem 0x00000000cffd0000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000ff700000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000012fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M4A78, BIOS 2301 08/25/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x130000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 0000000130000000 aka 4864M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcff80 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x12fe00000-0x12fffffff]
[mem 0x12fe00000-0x12fffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x12c000000-0x12fdfffff]
[mem 0x12c000000-0x12fdfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x12bffffff]
[mem 0x100000000-0x12bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcff7ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcfdfffff] page 2M
[mem 0xcfe00000-0xcff7ffff] page 4k
RAMDISK: [mem 0x35902000-0x36c78fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FB850 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000CFF80100 000064 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff1 ASR 20100825 MSFT 00000097)
ACPI: FACP 0x00000000CFF80290 0000F4 (v03 082510 FACP1543 20100825 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20140424/tbfadt-649)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 64/32 (20140424/tbfadt-618)
ACPI: DSDT 0x00000000CFF805D0 00CCE8 (v01 A1236 A1236001 00000001 INTL 20060113)
ACPI: FACS 0x00000000CFF98000 000040
ACPI: APIC 0x00000000CFF80390 00007C (v01 082510 APIC1543 20100825 MSFT 00000097)
ACPI: MCFG 0x00000000CFF80410 00003C (v01 082510 OEMMCFG 20100825 MSFT 00000097)
ACPI: SLIC 0x00000000CFF80450 000176 (v01 \xffffffff\xffffffff\xffffffff\xffffffff\xffffffff1 ASR 20100825 MSFT 00000097)
ACPI: OEMB 0x00000000CFF98040 000072 (v01 082510 OEMB1543 20100825 MSFT 00000097)
ACPI: SRAT 0x00000000CFF8F5D0 0000C8 (v03 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0x00000000CFF8F6A0 000038 (v01 082510 OEMHPET 20100825 MSFT 00000097)
ACPI: SSDT 0x00000000CFF8F6E0 000458 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
SRAT: Node 0 PXM 0 [mem 0x00100000-0xcfffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x12fffffff]
NUMA: Node 0 [mem 0x00000000-0x0009ffff] + [mem 0x00100000-0xcfffffff] -> [mem 0x00000000-0xcfffffff]
NUMA: Node 0 [mem 0x00000000-0xcfffffff] + [mem 0x100000000-0x12fffffff] -> [mem 0x00000000-0x12fffffff]
Initmem setup node 0 [mem 0x00000000-0x12fffffff]
NODE_DATA [mem 0x12fff9000-0x12fffdfff]
[ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x12fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009dfff]
node 0: [mem 0x00100000-0xcff7ffff]
node 0: [mem 0x100000000-0x12fffffff]
On node 0 totalpages: 1048349
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3997 pages, LIFO batch:0
DMA32 zone: 13246 pages used for memmap
DMA32 zone: 847744 pages, LIFO batch:31
Normal zone: 3072 pages used for memmap
Normal zone: 196608 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 6 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcff80000-0xcff97fff]
PM: Registered nosave memory: [mem 0xcff98000-0xcffcffff]
PM: Registered nosave memory: [mem 0xcffd0000-0xcfffffff]
PM: Registered nosave memory: [mem 0xd0000000-0xff6fffff]
PM: Registered nosave memory: [mem 0xff700000-0xffffffff]
e820: [mem 0xd0000000-0xff6fffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:6 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s83328 r8192 d23168 u262144
pcpu-alloc: s83328 r8192 d23168 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 - -
Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031946
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
AGP: Checking aperture...
AGP: No AGP bridge found
AGP: Node 0: aperture [bus addr 0x600000000-0x601ffffff] (32MB)
Aperture beyond 4GB. Ignoring.
AGP: Your BIOS doesn't leave a aperture memory hole
AGP: Please enable the IOMMU option in the BIOS setup
AGP: This costs you 64MB of RAM
AGP: Mapping aperture over RAM [mem 0xc4000000-0xc7ffffff] (65536KB)
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3959084K/4193396K available (7740K kernel code, 1200K rwdata, 3608K rodata, 1356K init, 1308K bss, 234312K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-5.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
NR_IRQS:16640 nr_irqs:728 16
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
allocated 16777216 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3008.312 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6016.62 BogoMIPS (lpj=12033248)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
LVT offset 0 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64, 1GB 0
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e81000 - ffffffff81e89000)
ftrace: allocating 29305 entries in 115 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) II X2 250 Processor (fam: 10, model: 06, stepping: 03)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (12033.24 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xcff98000-0xcffcffff] (229376 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:02:42, date: 01/25/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [1000, ffffff]
TOM: 00000000d0000000 aka 3328M
Fam 10h mmconf [mem 0xe0000000-0xefffffff]
node 0 link 0: mmio [e0000000, efffffff] ==> none
node 0 link 0: mmio [f0000000, ffffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [d0000000, dfffffff]
TOM2: 0000000130000000 aka 4864M
bus: [bus 00-07] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0xf0000000-0xffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
bus: 00 [mem 0xd0000000-0xdfffffff]
bus: 00 [mem 0x130000000-0xfcffffffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1002:5957] type 00 class 0x060000
pci 0000:00:02.0: [1002:5978] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:06.0: [1002:597c] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4390] type 00 class 0x01018f
pci 0000:00:11.0: reg 0x10: [io 0xc000-0xc007]
pci 0000:00:11.0: reg 0x14: [io 0xb000-0xb003]
pci 0000:00:11.0: reg 0x18: [io 0xa000-0xa007]
pci 0000:00:11.0: reg 0x1c: [io 0x9000-0x9003]
pci 0000:00:11.0: reg 0x20: [io 0x8000-0x800f]
pci 0000:00:11.0: reg 0x24: [mem 0xfbdffc00-0xfbdfffff]
pci 0000:00:11.0: set SATA to AHCI mode
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfbdfe000-0xfbdfefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfbdfd000-0xfbdfdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfbdff800-0xfbdff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfbdfc000-0xfbdfcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfbdfb000-0xfbdfbfff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfbdff400-0xfbdff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
pci 0000:00:14.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
pci 0000:00:14.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
pci 0000:00:14.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfbdf4000-0xfbdf7fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfbdfa000-0xfbdfafff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
pci 0000:01:00.0: [1002:94b3] type 00 class 0x030000
pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 0x18: [mem 0xfbef0000-0xfbefffff 64bit]
pci 0000:01:00.0: reg 0x20: [io 0xd000-0xd0ff]
pci 0000:01:00.0: reg 0x30: [mem 0xfbec0000-0xfbedffff pref]
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.1: [1002:aa38] type 00 class 0x040300
pci 0000:01:00.1: reg 0x10: [mem 0xfbeec000-0xfbeeffff 64bit]
pci 0000:01:00.1: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xe800-0xe8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfbfff000-0xfbffffff 64bit]
pci 0000:02:00.0: reg 0x30: [mem 0xfbfc0000-0xfbfdffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
vgaarb: setting as boot device: PCI:0000:01:00.0
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
e820: reserve RAM buffer [mem 0xcff80000-0xcfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:01: [dma 0 disabled]
pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:03: [io 0x04d0-0x04d1] has been reserved
system 00:03: [io 0x040b] has been reserved
system 00:03: [io 0x04d6] has been reserved
system 00:03: [io 0x0c00-0x0c01] has been reserved
system 00:03: [io 0x0c14] has been reserved
system 00:03: [io 0x0c50-0x0c51] has been reserved
system 00:03: [io 0x0c52] has been reserved
system 00:03: [io 0x0c6c] has been reserved
system 00:03: [io 0x0c6f] has been reserved
system 00:03: [io 0x0cd0-0x0cd1] has been reserved
system 00:03: [io 0x0cd2-0x0cd3] has been reserved
system 00:03: [io 0x0cd4-0x0cd5] has been reserved
system 00:03: [io 0x0cd6-0x0cd7] has been reserved
system 00:03: [io 0x0cd8-0x0cdf] has been reserved
system 00:03: [io 0x0800-0x089f] could not be reserved
system 00:03: [io 0x0b00-0x0b0f] has been reserved
system 00:03: [io 0x0b20-0x0b3f] has been reserved
system 00:03: [io 0x0900-0x090f] has been reserved
system 00:03: [io 0x0910-0x091f] has been reserved
system 00:03: [io 0xfe00-0xfefe] has been reserved
system 00:03: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:03: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io 0x0290-0x0297] has been reserved
system 00:04: [io 0x02a0-0x02af] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:07: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0x00100000-0xcfffffff] could not be reserved
system 00:07: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:02.0: PCI bridge to [bus 01]
pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:06.0: PCI bridge to [bus 02]
pci 0000:00:06.0: bridge window [io 0xe000-0xefff]
pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 19932K (ffff880035902000 - ffff880036c79000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
microcode: CPU0: patch_level=0x010000b6
microcode: CPU1: patch_level=0x010000b6
microcode: Microcode Update Driver: v2.00 , Peter Oruba
LVT offset 1 assigned for vector 0x400
IBS: LVT offset 1 assigned
perf: AMD IBS detected (0x0000001f)
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1422194562.975:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
msgmni has been set to 7900
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
pcieport 0000:00:06.0: irq 41 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1600x1200x32, linelength=6400, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90010780000, using 7552k, total 7552k
Console: switching to colour frame buffer device 200x75
fb0: VESA VGA frame buffer device
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
QUIRK: Enable AMD PLL fix
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfbdff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: applying AMD SB600/SB700 USB freeze workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfbdff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-29-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfbdfe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfbdfd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfbdfc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfbdfb000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfbdfa000
usb 1-2: new high-speed USB device number 2 using ehci-pci
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.16.0-29-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 70637fde89462678aff2d9c2bb1290be2fed1fb1'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 15:293:31
rtc_cmos 00:00: setting system clock to 2015-01-25 14:02:43 UTC (1422194563)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1356K (ffffffff81d2e000 - ffffffff81e81000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 440K (ffff880001792000 - ffff880001800000)
Freeing unused kernel memory: 488K (ffff880001b86000 - ffff880001c00000)
systemd-udevd[107]: starting version 208
random: systemd-udevd urandom read with 3 bits of entropy available
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfbdffc00 port 0xfbdffe80 irq 22
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:02:00.0: irq 42 for MSI/MSI-X
r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90010764000, 90:e6:ba:c0:96:6a, XID 18000000 IRQ 42
r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
scsi4 : pata_atiixp
scsi5 : pata_atiixp
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
usb 1-2: New USB device found, idVendor=0424, idProduct=2514
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 2 ports detected
ata6.00: ATAPI: TSSTcorp CDDVDW SH-S223F, SB02, max UDMA/100
ata6.00: configured for UDMA/100
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata1: softreset failed (device not ready)
ata1: applying PMP SRST workaround and retrying
ata2: softreset failed (device not ready)
ata2: applying PMP SRST workaround and retrying
usb 2-6: new high-speed USB device number 2 using ehci-pci
tsc: Refined TSC clocksource calibration: 3008.466 MHz
usb 2-6: New USB device found, idVendor=0bc2, idProduct=2321
usb 2-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-6: Product: Expansion
usb 2-6: Manufacturer: Seagate
usb 2-6: SerialNumber: NA4B4R33
usbcore: registered new interface driver usb-storage
scsi6 : uas
usbcore: registered new interface driver uas
scsi 6:0:0:0: Direct-Access Seagate Expansion 0502 PQ: 0 ANSI: 6
sd 6:0:0:0: Attached scsi generic sg0 type 0
sd 6:0:0:0: [sda] 1953525167 512-byte logical blocks: (1.00 TB/931 GiB)
sd 6:0:0:0: [sda] 2048-byte physical blocks
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-7: WDC WD1600JS-75NCB1, 10.02E01, max UDMA/133
ata2.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-7: WDC WD1600JS-75NCB1, 10.02E01, max UDMA/133
ata1.00: 312500000 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-75N 2E01 PQ: 0 ANSI: 5
sd 0:0:0:0: [sdb] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 0:0:0:0: Attached scsi generic sg1 type 0
sd 0:0:0:0: [sdb] Write Protect is off
sd 0:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: Direct-Access ATA WDC WD1600JS-75N 2E01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] 312500000 512-byte logical blocks: (160 GB/149 GiB)
sd 1:0:0:0: Attached scsi generic sg2 type 0
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 5:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S223F SB02 PQ: 0 ANSI: 5
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 5:0:0:0: Attached scsi CD-ROM sr0
sr 5:0:0:0: Attached scsi generic sg3 type 5
sdb: sdb1 sdb3 < sdb5 sdb6 >
sd 0:0:0:0: [sdb] Attached SCSI disk
usb 4-1: new low-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=045e, idProduct=07f8
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: Wired Keyboard 600
usb 4-1: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/0003:045E:07F8.0001/input/input5
hid-generic 0003:045E:07F8.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.1-1/input0
input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.1/0003:045E:07F8.0002/input/input6
hid-generic 0003:045E:07F8.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.1-1/input1
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 4f 00 00 00
sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1
sd 6:0:0:0: [sda] Attached SCSI disk
usb 1-2.1: new low-speed USB device number 5 using ehci-pci
usb 1-2.1: New USB device found, idVendor=09da, idProduct=000e
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: PS/2+USB Mouse
usb 1-2.1: Manufacturer: A4Tech
input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2.1/1-2.1:1.0/0003:09DA:000E.0003/input/input7
hid-generic 0003:09DA:000E.0003: input,hidraw2: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:12.2-2.1/input0
Switched to clocksource tsc
usb 3-3: new full-speed USB device number 2 using ohci-pci
usb 3-3: device descriptor read/64, error -62
random: nonblocking pool is initialized
EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: (null)
usb 3-3: device descriptor read/64, error -62
usb 3-3: new full-speed USB device number 3 using ohci-pci
usb 3-3: device descriptor read/64, error -62
usb 3-3: device descriptor read/64, error -62
usb 3-3: new full-speed USB device number 4 using ohci-pci
usb 3-3: device not accepting address 4, error -62
usb 3-3: new full-speed USB device number 5 using ohci-pci
usb 3-3: device not accepting address 5, error -62
usb usb3-port3: unable to enumerate USB device
init: plymouth-upstart-bridge main process (185) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (201) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (203) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (205) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (207) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (209) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (211) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (213) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (215) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (217) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (219) terminated with status 1
init: plymouth-upstart-bridge respawning too fast, stopped
Adding 1998844k swap on /dev/sdb5. Priority:-1 extents:1 across:1998844k FS
systemd-udevd[330]: starting version 208
wmi: Mapper loaded
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP]
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b0f (\SOR1) (20140424/utaddress-258)
ACPI Warning: SystemIO range 0x0000000000000b00-0x0000000000000b07 conflicts with OpRegion 0x0000000000000b00-0x0000000000000b2f (\_SB_.PCI0.SBRG.ASOC.SMRG) (20140424/utaddress-258)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3a
sp5100_tco: failed to find MMIO address, giving up.
MCE: In-kernel MCE decoding enabled.
EDAC MC: Ver: 3.0.0
[drm] Initialized drm 1.1.0 20060810
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
lp0: using parport0 (interrupt-driven).
snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
snd_hda_intel 0000:01:00.1: irq 43 for MSI/MSI-X
kvm: disabled by bios
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8
sound hdaudioC0D0: ALC662 rev1: SKU not ready 0x411111f0
sound hdaudioC0D0: autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sound hdaudioC0D0: mono: mono_out=0x0
sound hdaudioC0D0: dig-out=0x1e/0x0
sound hdaudioC0D0: inputs:
sound hdaudioC0D0: Front Mic=0x19
sound hdaudioC0D0: Rear Mic=0x18
sound hdaudioC0D0: Line=0x1a
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
[drm] radeon kernel modesetting enabled.
checking generic (d0000000 760000) vs hw (d0000000 10000000)
fb: switching to radeondrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (RV740 0x1002:0x94B3 0x1002:0x0D00).
[drm] register mmio base: 0xFBEF0000
[drm] register mmio size: 65536
ATOM BIOS: Walden
radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[drm] Detected VRAM RAM=512M, BAR=256M
[drm] RAM width 128bits DDR
[TTM] Zone kernel: Available graphics memory: 2023642 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 512M of VRAM memory ready
[drm] radeon: 1024M of GTT memory ready.
[drm] Loading RV730 Microcode
EXT4-fs (sdb6): re-mounted. Opts: errors=remount-ro
[drm] Internal thermal controller with fan control
[drm] radeon: dpm initialized
audit: type=1400 audit(1422190979.518:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=402 comm="apparmor_parser"
audit: type=1400 audit(1422190979.518:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=402 comm="apparmor_parser"
audit: type=1400 audit(1422190979.518:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=402 comm="apparmor_parser"
audit: type=1400 audit(1422190979.518:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=387 comm="apparmor_parser"
audit: type=1400 audit(1422190979.518:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=387 comm="apparmor_parser"
audit: type=1400 audit(1422190979.518:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=387 comm="apparmor_parser"
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
radeon 0000:01:00.0: WB enabled
radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800cb051c00
radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800cb051c0c
radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xffffc9001139c598
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:01:00.0: irq 44 for MSI/MSI-X
radeon 0000:01:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 2 usecs
[drm] ring test on 5 succeeded in 1 usecs
[drm] UVD initialized successfully.
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DVI-I-1
[drm] HPD2
[drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
[drm] Encoders:
[drm] CRT2: INTERNAL_KLDSCP_DAC2
[drm] DFP2: INTERNAL_UNIPHY1
[drm] Connector 1:
[drm] DIN-1
[drm] Encoders:
[drm] TV1: INTERNAL_KLDSCP_DAC2
[drm] Connector 2:
[drm] DVI-I-2
[drm] HPD1
[drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] DFP1: INTERNAL_UNIPHY
[drm] fb mappable at 0xD045E000
[drm] vram apper at 0xD0000000
[drm] size 9216000
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x75
radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:00.0: registered panic notifier
[drm] Initialized radeon 2.39.0 20080528 for 0000:01:00.0 on minor 0
init: Error while reading from descriptor: Broken pipe
init: failsafe main process (631) killed by TERM signal
audit: type=1400 audit(1422190983.398:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=740 comm="apparmor_parser"
audit: type=1400 audit(1422190983.398:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=740 comm="apparmor_parser"
audit: type=1400 audit(1422190983.398:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=740 comm="apparmor_parser"
audit: type=1400 audit(1422190983.398:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=740 comm="apparmor_parser"
Bluetooth: Core ver 2.19
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input16
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input17
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input18
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input19
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
init: cups main process (791) killed by HUP signal
init: cups main process ended, respawning
systemd-logind[936]: New seat seat0.
systemd-logind[936]: Watching system buttons on /dev/input/event1 (Power Button)
systemd-logind[936]: Watching system buttons on /dev/input/event0 (Power Button)
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
audit_printk_skb: 60 callbacks suppressed
audit: type=1400 audit(1422190987.622:32): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cups-browsed" pid=1114 comm="apparmor_parser"
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
systemd-logind[936]: Failed to start unit [email protected]: Unknown unit: [email protected]
systemd-logind[936]: Failed to start user service: Unknown unit: [email protected]
systemd-logind[936]: New session c1 of user royter.
systemd-logind[936]: Linked /tmp/.X11-unix/X0 to /run/user/1000/X11-display.
audit: type=1400 audit(1422191014.455:33): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2374 comm="apparmor_parser"
audit: type=1400 audit(1422191014.455:34): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2374 comm="apparmor_parser"
audit: type=1400 audit(1422191014.471:35): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="third_party" pid=2374 comm="apparmor_parser"
systemd-hostnamed[2686]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[2750]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
usb 2-6: USB disconnect, device number 2
sd 6:0:0:0: [sda] Synchronizing SCSI cache
sd 6:0:0:0: [sda]
Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
init: xboxdrv main process (639) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ...
Freezing of tasks failed after 20.006 seconds (2 tasks refusing to freeze, wq_busy=0):
syncthing D ffff88012fc53840 0 2322 2169 0x00000004
ffff8800b1cbfcc8 0000000000000082 ffff8800b02e4750 0000000000013840
ffff8800b1cbffd8 0000000000013840 ffff8800b02e4750 ffff88012fc54140
ffff88012ffbd1e8 ffff8800b1cbfd50 0000000000000082 ffffffff81169210
Call Trace:
[] ? sleep_on_page+0x20/0x20
[] io_schedule+0xaf/0x150
[] sleep_on_page_killable+0xe/0x50
[] __wait_on_bit_lock+0x48/0xb0
[] __lock_page_killable+0x6a/0x70
[] ? autoremove_wake_function+0x40/0x40
[] generic_file_read_iter+0x3f8/0x5b0
[] ? wake_up_state+0x10/0x20
[] ? wake_futex+0x67/0x90
[] fuse_file_read_iter+0x4c/0x70
[] new_sync_read+0x7e/0xb0
[] vfs_read+0x94/0x180
[] SyS_read+0x46/0xb0
[] system_call_fastpath+0x1a/0x1f
syncthing D ffff88012fc53840 0 2325 2169 0x00000004
ffff8800b0923cc8 0000000000000082 ffff8800b012a8c0 0000000000013840
ffff8800b0923fd8 0000000000013840 ffff8800b012a8c0 ffff88012fc54140
ffff88012ffdfce8 ffff8800b0923d50 0000000000000082 ffffffff81169210
Call Trace:
[] ? sleep_on_page+0x20/0x20
[] io_schedule+0xaf/0x150
[] sleep_on_page_killable+0xe/0x50
[] __wait_on_bit_lock+0x48/0xb0
[] __lock_page_killable+0x6a/0x70
[] ? autoremove_wake_function+0x40/0x40
[] generic_file_read_iter+0x3f8/0x5b0
[] ? wake_up_state+0x10/0x20
[] ? wake_futex+0x67/0x90
[] fuse_file_read_iter+0x4c/0x70
[] new_sync_read+0x7e/0xb0
[] vfs_read+0x94/0x180
[] SyS_read+0x46/0xb0
[] system_call_fastpath+0x1a/0x1f
Restarting tasks ... done.
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input20
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input21
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input22
input: Xbox 360 Wireless Receiver as /devices/virtual/input/input23
systemd-logind[936]: Operation finished.
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0 eth0: link down
r8169 0000:02:00.0 eth0: link up
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready